When you use both SSD and traditional HDD for a better performance experience windows PC, you have to make sure that the SSD should be your boot device. Many people face problems when they want to set the SSD as a boot order or boot device and search the internet for a solution for cloning process of windows OS. So here we come with a solution on how to boot from SSD bootable drive and you can get a significantly faster windows operating system and loading time by set SSD.
A Hard Disk Drive is a data storage device that uses magnetic storage to store and retrieve digital information using one or more rigid rapidly rotating discs put in the magnetic material.
The platters are padded with magnetic heads, usually arranged on a moving actuator arm that reads and writes data on the platter surfaces. Data is accessed in random-access memory, meaning that individual blocks of data can be stored or retrieved in any order and not only sequentially. STDs are a type of non-volatile storage, retaining store the data even when power off, introduced by IBM in 1956, HCDs became the dominant secondary storage device for general-purpose computers by the early 1960s.
A hard disk drive is so named because the heart of the matter is where the data is stored, which is on these disks and the data is stored magnetically as one and zeros or as magnetic bits. It is read or written as we say by very small transducers. This is basically a nonvolatile memory that can store a large amount of files.
Now, we all know what SSD is capable of, so if we use SSD as a boot drive that means we install our operating system into the SSD and use the HDD as data storage space. So when we use SSD as a boot drive the system and processers can easily access the boot files even faster, which will bring a noticeable change to the speed of your PC.
You know SSDs and how great they are and are using SSD for your boot drive. But a ton of people ask how do they can use an SSD for the boot drive and configure it to boot that particular drive and access a mass hard drive for storage and larger programs.
Now, the first step to get this configured properly in the BIOS, just press delete, F2 or F11 or whatever is set by default in your particular motherboard. Every board is laid out a little bit differently. In general, you’re going to look for a setting called boot option or menu.
Once you go inside the boot, you’re going to find a couple of different things. So number one is, it’s going to have some kind of laid out boot options priorities, so that’ll pick what type of device the computer will boot to first. In most cases, choosing a hard disk for this will make the computer boot slightly faster because it won’t spend time, so if you have HDD as the fifth one, then it won’t spend time looking for things in one, two, three and four slots before finally booting.
However, if you set up HDD first, and then if you want to boot to a target disk or a USB port drive or external hard drive, then you’ll have to make sure that you rearrange or override it whenever you want to do that. Most BIOS also has an HDD VBS or boot priority. Now, we are ready to exit and save.
Now, when we are back in Windows OS you can see, the drive still doesn’t show up. So what we have to do now, is go to my computer or computer and go to manage the computer, most specifically you want target disk management. This will allow you to see drives in same partition style that are attached to the computer but not yet initialized or not partitioned. Now all we need to do is right-click and create a new volume or SSD boot drive. We can use pretty much the default options for everything.
Next, you can choose the SSD as the boot drive letter or even mount it in an empty NTFS, so you could create a folder on your SSD drive. Next, you can select the SSD drive name and label this as you want and click on next and finish this. Once that is done the SSD drive will pop up as an option for you.
Now you can manually install the programs or migration software into that SSD drive, and you are done with it.
Ans: If your SATA SSD or Solid state drive is not listed in boot options, it’s possible that you didn’t do the cloning process properly. To avoid these types of issues, it’s advised to use reliable backup software such as AOMEI Backupper. The software offers system backup, so it will be able to create an identical system backup and move it to your SSD. Of course, you’re not limited just to system backup, and you can back up either disks or partitions or both.
Ans: Restart your computer and press the F2 key after the first screen. Press the Enter key to enter Config. Select Serial ATA and press Enter. Then, you’ll see SATA Controller Mode Option. Choose the IDE Compatibility Mode. Save the changes and restart your computer to enter BIOS.
Ans: Restart PC and press F2/F12/Del keys to enter BIOS. Go to the boot option, change the boot order, setting OS to boot from the new SSD. Save the changes, exit BIOS, and restart the PC. Wait patiently to let the computer boot up.
Ans: Restart your PC and then press F2 or F8 or F11 or Del key to enter the BIOS environment. Go to the boot section, set the cloned SSD as the boot drive in BIOS. Save the changes and restart the PC. Now, you should boot the computer from the SSD successfully.
We have now known how to boot from SSD and this will help us to change the boot legacy settings of our system and we will get faster Windows loading time rather than the previous or older or traditional hard disk drive loading time. This significantly faster loading time will increase the whole user experience and productivity.
So if you still have any doubts, then feel free to ask in the comment section below.
Also, let us know in the comment section if this blog is helpful or not. Don’t forget to check out G-Prime every week for updates.